| |
Mon Aug 23, 2010 17:51:46 Brian Deaver 2010 Yamaha SX240 Twin Jet Boat

| The boat ramp I use
is extremely active
with 2-3 trailers
on it at any given
time. It is also
steeper than
normal, in an area
with fairly heavy
wake, and is
perpetually blown
by a stiff 10-15
mph breeze.
Needless to say,
trailering my jet
boat was like
trying to steer a
dinner plate on
ice. Even with
steel guide-on
posts, the left to
right movement of
the boat made it
ridiculously
difficult to line
up and hold the
line, and on a
couple of occasions
actually flattened
the posts.
I installed the
fins Saturday
morning in less
than an hour and
then hit the lake.
The difference in
control and
steering at slow
speed is
remarkable.
Trailered the boat
like it had wheels,
first approach.
Lined up
beautifully and
held the line dead
center onto the
bunk boards. These
fins are a
fantastic add-on
for Yamaha jet
boats. |
Tue Aug 17, 2010 16:46:43 Mike Johnson 2009 yamaha 232 Ltd

| Fins are on and the
boat handles
great!! Thanks
Jeff, you saved the
day as far as my
wife and I are
concerned, no more
over steer at slow
speed, wife even
loaded it on the
trailer in 20 mph.
cross wind in one
shot!! |
Mon Aug 16, 2010 18:00:19 Dave Richardson Yamaha AR210 twin jet boat

| I too had a
miserable time
docking or
re-trailering my 21
foot twin jet boat
without the cobra
system. Jeff
shipped me a set
quickly and now its
like night and day
at slow or fast
speeds.
I would recomend
these to anyone
with a jet drive
system.
Dave Richardson
Beverly,
Massachusetts |
Sat Jul 03, 2010 12:31:38 Dave L Yamaha SX210
| Purchased new SX210
in May 2010. I had
a 20 Ft open bow
Rinker for 12 years
that had seen beter
days.
Fist trip on the
lake I almost
crashed into a pier
5 mins into the
maiden voyage--it
was like steering
on ice with bald
tires.
I installed the
cobrafins and it it
very close to the
same steering as an
outdrive boat---its
a no brainer---a
must have for a jet
boat regardless of
cost. |
Wed May 05, 2010 19:08:20 greg bethea

| I just purchased a
Yamaha Twin Engine
Jet boat which I
was having
difficulty steering
back onto the
trailer..I have
since brought a set
of fins, which have
made the difference
between night and
day. The fins were
well worth the
money. |
Wed Jan 27, 2010 22:25:35 Jerry Yamaha AR210

| Money well spent.
There is no way to
describe the
difference after
installing Cobra
Jet Fins other than
WOW. Thanks Jeff! |
Tue Jan 19, 2010 15:50:01 Gary Lake Ontario NY Yamaha 2005 SX230HO jet boat
| I love jet drives
over props for many
reasons even
without cobra jet
steering BUT… …
Installed at
beginning of 2009
season. What a
difference! Less
problems with cross
winds when docking.
All together better
handling when
maneuvering around
docks. Better
tracking when
crossing a wake at
an angle, or in
waves. Installation
simple. Whish I had
these the last four
years. Dual jet
drives are better
for handling than a
single drive, but
these should come
stock from the
factory. I’m
usually skeptical
of most
“performance
enhancing”
products. These are
amazing! Thanks for
creating them. |
Mon Nov 23, 2009 14:07:47 Tracy Ftaiti Seadoo challenger jet boat
| OMG the difference!
My husband and I
recently bought a
jet boat. We had
several crashes at
the marina where we
docked the boat. I
found the cobra
steering fins. I
mailed my nozzle to
Jeff for my
installation. He
got it back to me
the same day.
FEDEX. The fins
really work. I
feel so much
better. I was so
afraid to launch
the boat. Now, with
the fins, my fear
is gone. I highly
recommend the fins
for anyone with a
jet boat. It
really increases
the safety. |
Thu Sep 10, 2009 16:38:58 Craig Yamaha 232 Limited
| These steering fins
are GREAT!!. I
would suggest
everyone who owns a
jet boat purchase
these. |
Sat May 23, 2009 06:17:25 Derek Williams Yamaha SX 230
| The Cobra fins are
simply a lifesaver.
Without them my
boat was very
difficult to
control at low
speeds. So much so
that I had
entertained getting
rid of it.
However, I found
these fins on line
and gave it a try.
We loved the boat
just not the
steering. I put
the fins on
immediately after
arrival. Easy to
install. My boat
handles like a
dream. I highly
recommend the
Yamaha series of
boats, but only
with the CobraFins.
They should be a
standard feature on
every Yamaha jet
boat. |